|
|
|
| 7224 DC - 300KHz power amplifier |
|
|
- Small Signal Frequency Response
DC - 300 kHz +0.5 to -0.5 dB
- 8 ohm Power Response
± 140 Volts pk DC to 60 kHz
± 50 Volts pk DC to 180 kHz
± 30 Volts pk DC to 300 kHz
- Multiple Amplifier Series and Parallel operation
- Residual Noise
Unfiltered: Less than 75µvolts
Filtered: 400 Hz – 30 kHz Less than 55 µvolts
- THD
DC to 30 kHz less than 0.1%
- Output offset
Less than 5 µVolts, field adjustable to less than 1 µVolt
- Phase Response
± 5 degrees (10 Hz – 10 kHz) plus 560 nsec propagation delay
- Max Input Voltage
± 10 V either balanced or unbalance
- Common Mode Rejection
-58 dB with 5 Volt input |
|
|
|
|
|
- The 7224 offers the power and features of larger industrial amplifiers in a new smaller 2U size that runs from single phase power. It features DC – 300 kHz bandwidth, controlled current or controlled voltage modes of operation and has a wide range of field configurable options.
- The 7224 is a 1 kVA DC enabled AC amplifier that can be configured by the customer for High Voltage/Low Current, Medium Voltage and Current or Low Voltage/High Current applications.
- The 7224 can be connected (with optional input card) to other 7224 amplifiers to create systems with greater capabilities.
- Multiple Amplifier Series Operation:
Increased voltages possible 150 Vpk, 300 Vpk, 450 Vpk or 600 Vpk
Increased slew rate up to 200 V/uSec
- Multiple Amplifier Parallel Operation:
Increased current possible 50 Apk, 100 Apk, 150Ap or 200 Apk |
|
|
|
|
|
|
Legal information
