• StarFabric-Bridge CompactPCI Slave Board
  One or several of these boards are inserted in a device slot of a CompactPCI card rack with 3 U. The CompactPCI bus is the primary PCI bus. The StarFabric bus 0 is the first secondary PCI bus. The StarFabric bus 1 is the second secondary PCI bus.
  The Bridge board can either service two external bus systems or one external bus system with twice the speed.
  
  
• StarFabric-Bridge CompactPCI Master Board
  This board is inserted in the system slot of a CompactPCI card rack with3 U. The StarFabric bus 0 is the primary PCI bus. The StarFabric bus 1 is used to double the transfer rate.
  Four shielded cat5 cables of identical length with RJ45 connectors are required for 5 Gbit full duplex operation (66 MHz with 64-bit). The CompactPCI StarFabric board provides the interface between the serial StarFabric bus and the parallel CompactPCI bus.

More about AcquiStar

The PCI StarFabric board provides the interface between the parallel PCI bus and the two serial StarFabric busses. Two variants of the board are available:

• For motherboards with 5V supply voltage. (No 3.3 V supply required.)
• For motherboards with 3.3V supply voltage. (No 5 V supply required.)

More about AcquiStar