|
|
|
| cPCI6U-24DSI32R |
|
|
- 32 Differential 24-Bit Analog Input Channels
- Delta-Sigma Converter per Channel, with Linear Phase Digital Antialias Filtering
- Sample rates from 2 KSPS to 200 KSPS per Channel*
- Software-Selectable Input Ranges: ±2.5V, ±5V, ±10V
- 256 K-sample FIFO Buffer
- Synchronous Operation; All Channels Clocked Simultaneously
- Internal Sample Rate Generator
- Hardware Sync and Clock I/O for Multiboard Synchronization
- Low Phase Skew; Typically Less than 0.1-Degree with Fsig < 0.35*Fsamp
- DMA Engine Supports both Block-Mode and Demand-Mode Transfers
- Low Power Consumption. 20 Watts Typical. Only +5VDC Required from PCI bus.
- 100dB Dynamic Range; 93 dB SINAD to 100ksps
|
|
|
|
|
|
- Low noise, 24-bit resolution, low phase distortion and multi-board synchronization make the cPCI6U-24DSI32 board ideal for state-of-the-art sonar and noise monitoring applications. The 32-channel cPCI6U-24DSI32 analog input board provides a high-density 24-bit analog input resources on a standard 6U cPCI expansion board.. Optimized for flexibility and performance, the board is ideal for a wide variety of applications, ranging from simple precision voltage measurements, to the analysis of complex audio signals and waveforms.
Each of the 32 delta-sigma analog input channels can be can be harmonically locked together. A/D conversions on multiple boards can be synchronized and phase-locked. Input bandwidth is from DC to 80kHz. Sample rates are adjustable from 2KSPS to 200KSPS, and the input range is software selectable as ±2.5V, ±5V or ±10V. Internal autocalibration networks permit periodic calibration to be performed without removing the board from the system. |
|
|
|
|
|
|
Legal information
