Stand alone operation
LogMessage is a stand alone operating device for acqui-ring, monitoring, calculating and logging measurementdata. It is equipped with a 1GB memory for logging up to128 million measurement values.

Universal applications
The LogMessage's analog inputs are differentially andgalavanically isolated from each other as well as from thepower supply. Earth loops and non-isolated sensors there-fore present no problem. All analog inputs can be useduniversally and are capable of measuring any type of thermo-couple, RTD, voltage or current signal. Channel configura-tion takes place via the easy to use DataServiceConfigurator software included with the delivery.

Various interfaces
Once configured, LogMessage can operate stand aloneand requires no PC support. Configuration and data read-out takes place via a network interface. LogMessage's twoserial ports enable connection of a modem for remoteaccess, or for other hardware to be connected for datatransfer purposes. Alarm notifications and text messagesmay also be transmitted using a GSM modem. By operatingthe LogMessage device within a network, measurementdata can be transmitted online and processed using theProfiSignal Go software.

A complete system including software
LogMessage devices are supplied with the powerfulProfiSignal Go software. ProfiSignal Go is a professionalPC software for the online and offline monitoring andanalysisof measurement data. If you already use othermeasurement technology software, the full service packageincludes LabVIEW™ and DASYLab™ drivers, Modbus TCPand OPC Server.