|
|
|
| PCI-12AISS44AO4 |
|
|
- 8 Differential Analog Inputs with Dedicated 12-Bit, 2.0 MSPS ADC per Channel
- True Simultaneous Sampling of all Inputs; Minimum Data Skew
- Sampling Rates to 2.0 MSPS per Channel (16 MSPS Aggregate Rate)
- Input Ranges: ±1V, ±100mV; Factory Configured. Custom ranges to ±10V.
- 64-Ksample Analog Input FIFO Data Buffer
- Supports DMA Transfers in Two Channels in Block-Mode or Demand-Mode
- 4 Analog Output Channels with Direct Register Access
- 16-Bit Bidirectional Digital I/O Port
- Sampling Controlled by Internal Rate Generator, by Software Trigger, or Externally
- On-Demand Internal Autocalibration
- Hardware Sync I/O for Multiboard Operation
- Integral Dual-Conversion Precision Analog Power Supplies
- Completely Software-Configurable; No Field Jumpers
- Conforms to PCI Local Bus Specification, Revision 2.3, with Universal Signaling
|
|
|
|
|
|
- The 12-Bit PCI-12AISS44AO4 analog I/O board samples and digitizes eight input channels simultaneously at rates up to 2.0 million samples per second for each channel. 12-bit sampled data is available to the PCI bus through a 64K-Sample FIFO buffer. All data is channel-tagged. Analog input sampling can be controlled from an internal rate generator, through software, or by external hardware.
Both burst and continuous sampling modes are supported. Input ranges are factoryconfigured as ±1V, ±100mV or ±10V for each of two input channel groups. Four analog output channels provide software-selected output ranges of ±2.5V, ±5V or ±10V, and are accessed directly through dedicated control registers. A 16-Bit bidirectional digital port can be configured as two independent byte-wide ports. |
|
|
|
|
|
|
Legal information
