|
|
|
| PCI |
|
 |
PCI-HPDI32A, High-speed Digital I/O |
|
|
|
|
- 80 Mbytes per second (max) input transfer rate via the front panel connector (RS422/485 differential I/O transceivers)
- 200 Mbytes per second input transfer rate via the front panel connector (Pseudo ECL I/O transceivers)
- 132 Mbytes per second PCI transfer rate in burst mode.
- A single board can interface to a wide variety of external high-speed devices.
- "Deep FIFO buffers" (up to 512 Kbytes) allow data bursts to be transferred over the PCI bus independent of transfers over the cable.
More about PCI-HPDI32A |
|
|
|
|
|
|
|
PCI-HPDI32A-COS, cPCI Digital I/O with Change-of-State |
|
|
|
|
- 20 Mhz Sample rate.
- Software Selectable COS or Logic Analyzer Operation
- Software Selectable Clock divider
- Software Selectable COS or Logic Analyzer Mask.
More about PCI-HPDI32A-COS |
|
|
|
|
|
|
|
PCI-OPTO32B , Optically-Isolated I/ O with Change-of-State Interrupts |
|
|
|
|
- 24 optically isolated inputs
- Selectable input voltage range thru use of field replaceable bias resistors
- 8 optically isolated outputs
- 4 normal current, 4 high current
More about PCI-OPTO32B |
|
|
|
|
|
|
|
PCI64-HPDI32AL, High-Speed Digital I/O; 64-bit PCI |
|
|
|
|
- 80 Mbytes per second (max) input transfer rate via the front panel connector (RS422/485 differential I/O transceivers)
- 200 Mbytes per second input transfer rate via the front panel connector (LVDS transceivers)
- 264 Mbytes per second PCI transfer rate in burst mode.
- A single board can interface to a wide variety of external high-speed devices
- "Deep FIFO buffers" (up to 512 Kbytes) allow data bursts to be transferred over the PCI bus independent of transfers over the cable
More about PCI64-HPDI32AL |
|
|
|
|
|
|
|
PCI64-HPDI32ALT, TTL or LVDS 32-bit Digital I/O |
|
|
|
|
- 200 Mbytes per second (max) input transfer rate via the front panel connector (TTL I/O transceivers)
- 200 Mbytes per second input transfer rate via the front panel connector (LVDS transceivers)
- 264 Mbytes per second PCI transfer rate in burst mode.
- A single board can interface to a wide variety of external high-speed devices.
More about PCI64-HPDI32ALT |
|
|
|
|
|
|
|
PCI-DIO24, Flexible Digital Input/Output |
|
|
|
|
- Data input/output width of 24 bits.
- RS422/485 differential I/O transceivers or ECL differential I/O transceivers.
- 50 pin front panel connector for easy access via twisted pair ribbon cable.
- A single board can interface to a wide variety of external high-speed devices.
More about PCI-DIO24 |
|
|
|
|
|
|
|
PCI-DMI32, Very High-speed Parallel Digital Input/Output Board Up to 200 Mbytes/s Cable I/O |
|
|
|
|
- The DMI will transfer up to 4GB of unique data continuously at up to 50 Mhz
- Provides for data I/O via the cable at up to 200 Mbytes per second (LVDS differential I/O)
- Can transfer data indefinitely without host intervention
- Bi-directional handshake signals can be user defined
More about PCI-DM32 |
|
|
|
|
|
|
|
CompuScope 3200, 32 Bit, 100 MHz Digital Input |
|
|
|
|
- Capture 32 Bit of Digital Data
- 100 MHz Clock Rates
- Software Configurable to provide 8, 16, or 32 Bits
- Up to 2 GB of On-Board Acquisition Memory
- Multi-Card Systems providing wider input words of 64, 96, or 128 Bits
- CMOS, LVDS or ECL/PECL data inputs
More about: CompuScope 3200 |
|
|
|
|
|
|
|
PulseBlaster, Programmable TTL Pulse/Pattern |
|
|
|
|
|
PulseBlasterESR, Pulse/Pattern Generator |
|
|
|
|
- High speed - Up to 400 MHz clock frequency
- 24 independently controlled output channels
- 4 BNC bracket mounted connectors
- 50 ohm impedance matched outputs
More about PulseBlasterESR |
|
|
|
|
|
|
|
|
