SensoBox Signal Conditioning Amplifier

HOME Products Contact Us

> September 2010

		Home >

SensoBox Signal Conditioning Amplifier

	Description

The SensoBox provides a flexible general signal-conditioning amplifier for use with accelerometers, microphone preamplifiers and many other type of sensors wich requires signal conditioning and filtering. SensoBox is available with up to 16 channels, and fits into a 19” rack or alternatively, can be used as an instrument case for mobile applications.

The modular architecture permits SensoBox to be expanded and upgraded in the field. By using separate Input/Output modules for each individual channel, the user has the freedom to expand the system at a later stage, without sending the system back to factory. Just buy additional Input/output modules, as the requirements grows.

SensoBox is designed to handle all your need for signal conditioning in multichannel applications. The system supports up to 16-channels of ICP-transducers. The gain is programmable from 1 to 64 in steps of 1. Fixed gain of x1, x10 and x100 are also available. For Low-Pass filtering, an Elliptic or Linear Phase filter can be used. A-weighting filter and Singel/Double Integration are available as an option.

	Specifications

The SensoBox has the following specifications:

Number of channels	Up to 16
Input signal	±10 V
Output signal	±10 V
Sensor excitation	2, 4, 10 and 20 mA
Programmable gain	From 1 to 64 in steps of 1, x10 and x100
Bandwidth	0.1 Hz to 100 kHz
Filters	Elliptic or linear phase LP-filter, A-weighting
Optional integration	Single or double integration
Power Requirements	90-264 VAC or 10-36 VDC, 50 W
Size	2U, 80 x 482.6 x 250.4 mm
Weight	5 kg

Legal information