|
|
|
| LF Industrial Power Amplifier |
|
 |
7224 - DC - 200KHz Power Amplifier |
|
|
|
|
|
7548 - DC - 100KHz Power Amplifier |
|
|
|
|
- Over 12,000 watts peak for 40 mSec and 5,500 watts peak continuous into a 1-ohm load.
- 40 mSec pulses of up to 105 amperes peak into a 1-ohm load.
- System output of 800 volts and 70 amperes maximum are possible with multiple, interconnected amplifiers.
- Frequency bandwidth of DC to 50 kHz at rated power; DC to 100 kHz at reduced power.
More about 7548 |
|
|
|
|
|
|
|
7796 DC - 100KHz Power amplifier |
|
|
|
|
- Over 22,000 watts peak for 40 mSec and 8,000 watts peak continuous into a 0.5-ohm load. 40 mSec pulses of up to 209 amperes peak into a 0.5-ohm
- load. System output of over 650 volts and 250 amperes maximum are possible with multiple, interconnected amplifiers
- Frequency bandwidth of DC to 50 kHz at rated power, DC to 100 kHz at reduced power.
More about 7796 |
|
|
|
|
|
|
|
8101 Power Supply Amplifier |
|
|
|
|
- Up to 16 Arms and 139 Vrms continuous output.
- Frequency bandwidth at full power of 20 Hz – 20 kHz.
- Compact design; only 2U of rack space and 33 lbs. for both gradient amplifier and power supply.
- Switching power supply for reduced weight
More about 8101 |
|
|
|
|
|
|
|
8205 Two-channel Gradient Amplifier |
|
|
|
|
- Up to 160 Vpk, 50 Apk power per channel into normal small bore loads
- DC – 100 kHz RMS noise floor of less than 0.1 mA.
- Compact design; only 2U of rack space and 33 lbs. for both gradient amplifier and power supply.
- Fast slew rate of 20 volts per microsecond
More about 8205 |
|
|
|
|
|
|
|
8210 Single Gradient Amplifier |
|
|
|
|
- Up to 160 Vpk, 50 Apk power into normal small bore loads
- DC – 100 kHz RMS noise floor of less than 0.1 mA.
- Compact design; only 2U of rack space and 33 lbs. for both gradient amplifier and power supply.
- Fast slew rate of 20 volts per microsecond
More about 8210 |
|
|
|
|
|
|
|
|
