> May 2012
Home > Products > Functions > Signal Conditioning > USB
USB Signal Conditioning
USBDR-8 Multi-channels USB amplifiers
[ zoom ]
  • Power worldwide with universal AC adapter
  • DC power from 12V to 50V source
  • Install from 1 up to 8 channels per USBDR-8
  • Daisy chain USBDR-8 to control up to 112 channels using just one USB port
  • USB 2.0 compatible communication

    More about USBDR-8
Back to top of page
USBPIA-S1 Single Channel USB Amplifier
[ zoom ]
  • USB 2.0 compatible communication for setup and control
  • Non-volatile configuration retains all settings through power cycles
  • Does not need to be attached to a PC to operate
  • Universal AC/DC converter included for 115VAC or 220VAC power can be used anywhere on the planet
  • DC power source allows for convenient 9 to 12V battery operation
  • Compatible with any 12-, 16, or 24-bit A/D converter device

    More about USBPIA-S1
Back to top of page
USBPBP-S1 Single Channel USB BP Filter & Amplifier
[ zoom ]
  • USB 2.0 compatible communication for setup and control
  • Non-volatile configuration retains all settings through power cycles
  • Does not need to be attached to a PC to operate
  • Universal AC/DC converter included for 115VAC or 220VAC power can be used anywhere on the planet
  • DC power source allows for convenient 9 to 12V battery operation
  • Compatible with any 12-, 16, or 24-bit A/D converter device

    More about USBPBP-S1
Back to top of page
USBPGF-S1 Single Channel USB LP Filter & Amplifier
[ zoom ]
  • Differential or single ended input
  • ± 10Vmax Signal Input and Output with input protection up to ±40V
  • Software-programmable instrumentation amplifier gains of 1 to 1000
  • Compatible with any 12-, 16, or 24-bit A/D converter devices
  • Windows Vista/XP/NT/2000 compatible menu setup software included
  • Software select any corner frequencies from 0.1 Hz to the maximum corner frequency with no steps

    More about USBPGF-S1
Back to top of page
USBPHP-S1 Single Channel USB HP Filter & Amplifier
[ zoom ]
  • USB 2.0 compatible communication for setup and control
  • Non-volatile configuration retains all settings through power cycles
  • Does not need to be attached to a PC to operate
  • Universal AC/DC converter included for 115VAC or 220VAC power can be used anywhere on the planet
  • DC power source allows for convenient 9 to 12V battery operation
  • Compatible with any 12-, 16, or 24-bit A/D converter device

    More about USBPHP-S1
Back to top of page
22/05/2012
SC5107A PXI Distribution Amplifier
19/05/2012
SC5302A 1.3 Ghz RF Down Converter
16/05/2012
SC5101A Desktop Distribution Amplifier
14/05/2012
ADQ108 Data Acquisition Card, Single-channel, 8-bit, 6.4 GS/s, 3GHZ BW
Acquitek
1 bis rue Marcel Paul
91300 Massy
France
: +33 1 60 13 52 73
: +33 1 60 13 03 68
: info@acquitek.com