TP-ACC20 - Accelerometer

Main features

  • Sensor input range ± 2 g
  • Sensitivity 420 mV/g typical
  • Zero g bias level 1.5 V typical
  • Zero g offset vs. temperature < ± 0.5 mg/°C
  • Bandwidth 500 Hz
  • Sensor resonant frequency 5.5 kHz typical
Price request Datasheet Ask a question

The Accelerometer TP-ACC20 is a dual axis accelerometer combined with a manual trigger button, designed to be used with the Handyscope HS3, Handyscope HS4, Handyscope HS4 DIFF (order code TP-ACC20-25) and Handyscope HS5 and Handyscope HS6 DIFF (order code TP-ACC20-09).

The dual accelerometer is a low power dual axis accelerometer with voltage outputs. It can measure accelerations in two axes, up to ± 2 g. It can measure both dynamic acceleration and static acceleration (gravity).

The manual trigger button can be used to trigger measurements in situations where no trigger condition can be derived from the input signals.

The acceleration sensor of the Accelerometer TP-ACC20 is placed in a small package with a long, thin flexible cable. The package contains strong magnets to attach the sensor to magnetic (steel) surfaces without the need of screws or clamps. One side of the package contains a patch of velcro, to attach the sensor to fabric surfaces.

The Accelerometer TP-ACC20 also contains a manual trigger button. This button can be used to manually trigger measurements in situations where no trigger condition can be derived from the input signals. The manual trigger button has a solid aluminum body and is fitted with a male BNC connector. A long flexible cable with a female BNC connector is used to connect the button to the instrument.

TP-ACC20-25 - Accelerometer for HS5 and HS6

Accelerometer

TP-ACC20-09 - Accelerometer for HS3, HS4, HS4 Diff

Accelerometer

TP-ACC20 Accelerometer
TP-ACC20-25 Accelerometer for HS5 and HS6
TP-ACC20-09 Accelerometer for HS3, HS4, HS4 Diff

7ebb38cda60f504b4f1b567e1d51a9ce{{{{{{{{{{{{{{{{{{{{