1020L - RF Power amplifier 10KHz - 5MHz, 200 Watts

Main features

  • 10KHz – 5 MHz
  • 200W
  • Power Measurement – Forward & Reflected
  • Solid State Reliability
  • Forced Air Cooling
Price request Datasheet Ask a question

The 1020L Amplifier is a rugged source of RF power for ultrasonics, induction heating and laser modulation as well as plasma applications. It is a totally solid state solution employing RF DMoS FETs in the power amplification stages, offering simultaneous forward and reverse power readouts, and RS232 port for data collection. The 1020L reflects E&I’s commitment to reliable and robust RF power.

The 1020L RF Power Amplifier produces 200 Watts of quasi linear class AB power over a frequency range of 10 to 5000 KHz, with a nominal power gain of 55 dB (+/-1dB). Operation over the entire frequency range is possible without the need for any switching.

The front panel display provides simultaneous measurements of forward and reflected power as well as the unit’s status. The RS232 connector at the rear of the unit can also be used to capture this data and reset the unit should a fault occur.  The E&I 1020L RF Power Amplifier is a 19” rack mount unit 3U high. It employs an integral power supply capable of operation at 115 or 220 VAC, 50 – 60 Hz. The unit weighs approximately 45 lbs or 16 Kg.

1020L RF Power amplifier 10KHz - 5MHz, 200 Watts

  • 1020L Manual
2-LIM - 2 Watts RF Power Limiter 2-LIM - 2 Watts RF Power Limiter

The E&I 2-LIM will provide extra protection for your amplifier from ESD or accidental overdrive. It is useful in stabilizing generator outputs and reducing amplitude variability. It has ...