CPCI66-18AI64SSC750K - 64-ch, 750kS/s 18-bit, analog input cPCI board

Main features

  • 64 Analog inputs with dedicated 18-Bit SAR ADC per Channel
  • Simultaneous sampling of all inputs; Minimum Data Skew
  • Sampling Rates to 750 KSPS per channel (48 MSPS aggregate rate)
  • Continuous, Burst and Single-Sample Clocking Modes
  • Software and I/O pinout compatibility with the 16AI64SSA/C
  • Selectable Differential Processing Simulates Differential Operation of Channel Pairs
  • Input Ranges software-selectable as ±10V, ±5V, 0 to +5V or 0 to +10V
  • Hardware Sync I/O for Multiboard Operation
  • FIFO buffer provides 256 K-Sample data capacity at 18 bits; 512K at 16 bits with data packing.
  • A software-selectable low-latency configuration provides 64 registers that duplicate the last sample from all A/D converters
  • 2-Channel DMA Engine
  • Sampling and burst triggering controlled by internal rate generators, or by direct software control, or externally
  • On-demand internal autocalibration of all channels
  • Completely software-configurable; No field jumpers
  • D32; 66MHz, 33MHz PCI compatibility, with universal 5V/3.3V Signaling
  • Internal Sync/Clock I/O connector provides behind-panel access to clock and sync signals
  • PMC version protected with integral EMI shield over analog components
  • Exist in PCIe, PCI, cPCI/PXI, PC104 and PMC
Price request Datasheet

The 18-Bit CPCI66-18AI64SSC750K analog input board samples and digitizes 64 input channels simultaneously at rates up to 750,000 samples per second for each channel.
Each input channel contains a dedicated 18-Bit sampling ADC, and the resulting 18-bit sampled data is available to the cPCI bus through a 256 K-Sample FIFO buffer.Throughput capacity is further enhanced with 66MHz cPCI support and increased local clocking frequency. All operational parameters are software configurable.

Inputs can be sampled in groups of 1, 2, 4, 8, 16, 32 or 64 channels; or software can select a first and last channel to be acquired. The sample clock can be generated from an internal rate generator, or by software or external hardware. Input ranges are software selectable as ±10V, ±5V, and 0 to +10V, or optionally as ±5V, ±2.5V, 0 to +10V, and 0 to +5V .

An on-demand autocalibration feature determines offset and gain correction values for each input channel, and applies the corrections digitally during acquisition. A selftest switching network routes calibration reference signals to each channel through internal selftest switches, and permits board integrity to be verified by the host.

CPCI66-18AI64SSC750K64-ch, 750kS/s 18-bit, analog input cPCI board

78a33b28c28af258bf9da29962082517sssssssssss