2110 - DC - 100KHz Linear power amplifier

Main features

  • Over 12,000 watts peak for 40 mSec and 5,500 watts peak continuous into a 1-ohm load.
  • 40 mSec pulses of up to 105 amperes peak into a 1-ohm load.
  • System output of 800 volts and 70 amperes maximum are possible with multiple, interconnected amplifiers.
  • Frequency bandwidth of DC to 50 kHz at rated power; DC to 100 kHz at reduced power.
  • Rugged chassis for stand-alone or rack mounted operation. No additional power supplies are required.
  • Protection circuitry protects the 2110 from input overloads, improper output connection
  • current, and supply voltages that are too high or low.
  • Shipped ready to operate from 208-volt (±10%) three-phase AC mains. Operation from 400-volt (±10%) AC mains are available on request.
Price request Datasheet Ask a question

The AE Techron 2110 amplifier is a DC-enabled, high-powered unit designed to provide very low noise and fast slew rates. A single 2110 has an output capability of 100 amperes peak and 200 volts peak when driving typical MRI gradient coil loads. It can output a 40 mSec pulse with up to 105 amperes peak current into a 1-ohm load. If more current is needed, up to four amplifiers can be combined in series or parallel and operate as a single system.

The 2110 can operate in either voltage or current mode and features robust output devices and a power range of over 3300 watts RMS. It can safely drive a wide range of resistive, inductive loads.

2110 DC - 100KHz Linear power amplifier

Similar products

4a3dd5ad8a0da77e35824985efb9b743^^^^^^^^^^^^^^^