2400L - RF power amplifier 10KHz - 10MHz, 400 watts

Main features

  • 10 KHz to 10 MHz 
  • 400 W
  • Instantaneous Bandwidth 
  • 1dB Compression 
  • Solid State  Air Cooled
Price request Datasheet

The 2400L Amplifier is a rugged source of RF power for ultrasonics, induction heating and laser modulation as well as plasma applications. It is a totally solid state solution employing RF DMoS FETs in the power amplification stages, offering simultaneous forward and reverse power readouts, and an RS232 port for data collection. The 2400L reflects E&I’s commitment to reliable and robust RF power.

The 2400L RF Power Amplifier produces 400 Watts of linear class A power over a frequency range of 10 KHz to 10 MHz, with a nominal power gain of 55dB (+/- 1.5dB). Operation over the entire frequency range is possible without the need for any switching.

The front panel display provides simultaneous measurements of forward and reflected power as well as the unit’s status. The RS232 connector at the rear of the unit can also be used to capture this data and reset the unit should a fault occur.

The E&I 2400L RF Power Amplifier is a 19” rack mount unit . It employs an integral power supply capable of operation from 200-240 VAC 50–60 Hz. The unit weighs approximately 95lbs or 43 Kg.

2400LRF power amplifier 10KHz - 10MHz, 400 watts

2-LIM - 2 Watts RF Power Limiter 2-LIM - 2 Watts RF Power Limiter

The E&I 2-LIM will provide extra protection for your amplifier from ESD or accidental overdrive. It is useful in stabilizing generator outputs and reducing amplitude variability. It has ...