PC104P-12AISS8AO4 - 12-Channel, 12-Bit Analog PC104+ Input/Output

Main features

  • 8 Differential Analog Inputs with Dedicated 12-Bit, 2.0 MSPS ADC per Channel
  • True Simultaneous Sampling of all Inputs; Minimum Data Skew
  • Sampling Rates to 2.0 MSPS per Channel (16 MSPS Aggregate Rate)
  • Software-Selectable Input Ranges: ±10V, ±1V, ±100mV
  • 64Ksample Analog Input FIFO Data Buffer
  • Supports DMA Transfers in Two Channels in Block-Mode or Demand-Mode
  • 4 Analog Output Channels with Direct Register Access
  • 16-Bit Bidirectional Digital I/O Port
  • Sampling Controlled by Internal Rate Generator, by Software Trigger, or Externally
  • Input Frequency response to 900kHz on ±10V Range, 10kHz on ±100mV Range.
    (Refer to the PMC-12AISS44AO4 product specification for a wideband version of this product).
  • On-Demand Internal Autocalibration
  • Hardware Sync I/O for Multiboard Operation
  • Integral Dual-Conversion Precision Analog Power Supplies
  • Completely Software-Configurable; No Field Jumpers
  • Conforms to PCIe Local Bus Specification, Revision 2.3, with Universal Signaling
  • Exist in PMC, cPCI/PXI, PCIe and PCI
Price request Datasheet

The 12-Bit PC104P-12AISS8AO4 analog I/O board samples and digitizes eight input channels simultaneously at rates up to 2.0 million samples per second for each channel. The resulting 12-bit sampled data is available to the PC104+ bus through a 64K-Sample FIFO buffer. All data is channel-tagged. The analog inputs can be sampled in groups of 1 through 8 channels, and the sample clock can be generated either from an internal rate generator, through software, or by external hardware.

Both burst and continuous sampling modes are supported. Input ranges are software-selectable as ±10V, ±1V, or ±100mV. The inputs can be divided into two channel groups that can be assigned input ranges independently.

Four analog output channels provide software-selected output ranges of ±2.5V, ±5V or ±10V, and are accessed directly through dedicated control registers. A 16-Bit bidirectional digital port can be configured as two independent byte-wide ports.

PC104P-12AISS84AO412-Channel, 12-Bit Analog PC104+ Input/Output