PCI66-16AISS16AO2 - 16-bit, 18 Ch, 1MS/s simultaneous PCI Board

Main features

  • 16 Differential Analog Inputs with Dedicated 16-Bit SAR ADC per Channel
  • True Simultaneous Input Sampling to 1.0 MSPS per channel
  • SAR Architecture; No Minimum Sample Rate
  • Two Single-Ended Analog Outputs with Dedicated 16-Bit DAC per Channel
  • Simultaneous Output Clocking Rates to 1.0 MSPS per Channel
  • Selectable Direct-Write or FIFO-Buffered Access
  • Buffer Configurable as Open for Data Streaming, or Circular for Periodic Functions
  • Software-Selectable Input/Output Ranges: ±10V, ±5V, ±2.5V
  • Independent 256-Ksample Input and Output FIFO Data Buffers
  • Independent or synchronous input/output clocking
  • Hardware Clock and Sync I/O for Multiboard Operation
  • Internal Power Conversion; Single 5-Volt PCI Power Requirement
  • DMA Engine Minimizes Bus Congestion
  • Timing Controlled by Internal Rate Generator, by Software Clocking, or Externally
  • Three Independent 24-Bit frequency dividers.
  • Internal Autocalibration
  • Six Bidirectional Digital I/O line
  • 66 MHz 32-Bit PCI Support, with Universal 5V/3.3V Signaling
  • Exist in PCIe, PCI, cPCI/PXI, PC104 and PMC
Price request Datasheet

The 16-Bit PCI66-16AISS16AO2 analog I/O module samples and digitizes 16 input channels simultaneously at rates up to 1.0 million samples per second per channel, and the resulting 16-bit sampled data is available to the PCI bus through a 256K-Sample FIFO buffer. Sampling can be controlled in groups of 1 through 16 channels, and the sample clock can be generated either from an internal rate generator, or by software or an external source. Both burst and continuous sampling modes are supported, and input ranges are software-selectable as ±10V, ±5V or ±2.5V. The inputs are divided into two channel groups, with an independent software-controlled range assignable to each group.

Two analog output channels provide software-selected output ranges of ±2.5V, ±5V or ±10V that are independent of the input range assignments. The outputs are accessed either directly through two dedicated control registers, or through a 256K-Sample FIFO buffer for waveform generation. Four bidirectional digital I/O lines are programmable as inputs or outputs.

PCI66-16AISS16AO216-bit, 18 Ch, 1MS/s simultaneous PCI Board

9f251496bdc73cacaa0d9d41db0852a7\\\\\\\\\\\\\\\\\\\\\\\\\\